RETAINER PACKAGE-2/PK
Retainer Kit
CURT GROUP
This replacement retainer kit is made to fit certain Curt round bar weight distribution hitches. Designed to keep spring bars attached to the WD head. Includes: two clips, two locking pins and two rivets.
Stock # | Retail |
---|---|
1205-25 | $35.10 |
LONG L-BRACKET KIT-2/PK
Long L-Bracket Replacement Kit - 2/PK
BLUE OX
Replacement Long L-Brackets for Blue Ox TrackPro and 2-Point Weight Distribution hitches. Includes: 2 Brackets and mounting hardware.
Stock # | Retail |
---|---|
1271-16 | $179.03 |
ROTATING LATCH BOLT-ON
Swaypro™ Bolt On Rotating Latch Kit
BLUE OX
For use on all SwayPro™ weight distributing hitch models.
Stock # | Retail |
---|---|
1271-18 | $508.50 |
ROTATING LATCH CLAMP ON
Swaypro™ Clamp On Rotating Latch Kit
BLUE OX
Install the hitch; Position the trailer on the ball; Place the sway bars on the hitch; Set the rotating latch assembly on the frame so that the chain aligns with the center of the rotating latch; Install appropriate set screw and locking hex nut; Torque all bolts to approximately 15-20 ft. lb.; Rotate the latch clockwise, place the chain into the slot Twist the latch counterclockwise to lock. Do this to both sides.
Stock # | Retail |
---|---|
1271-19 | $508.50 |
OnTarget Towing Tool
PROGRESS MFG
The OnTarget™ Towing Tool by Equal-i-zer gives you peace of mind. It is the easiest and fastest way to measure your weight distribution. With a few quick measurements, it calculates your weight distribution percentage, so you can make the adjustments needed for a comfortable, safer tow. Whether you are installing your hitch yourself, or a dealership professionally installed your hitch, it is important to make sure your setup has the proper weight distribution percentage. Even small changes in trailer cargo, like full or empty water tanks, can affect your weight distribution and reduce tow vehicle stability. Now there is a simple, easy way to make sure your weight distribution is OnTarget. The OnTarget also makes campsite set up quick and easy. Use the laser distance measuring feature to quickly show how deep your campsite is or whether or not you can fully extend your awning in a wooded area. The OnTarget can also be used to level your trailer, which provides a more enjoyable stay.
Stock # | Retail |
---|---|
474-10 | $165.38 |
BETTERWEIGH TOWING SCALE
CURT GROUP
BetterWeigh™ wirelessly links to your smartphone to display real-time vehicle and trailer weights. It easily plugs into any standard vehicle diagnostic port (OBD-II) under the steering wheel, and uses Bluetooth to connect to your Apple or Android phone. It then sends a live readout of all weights related to towing and hauling, including the gross weight of your vehicle and trailer, cargo, payload, tongue weight, pin weight and weight distribution. This streamlines the towing setup process for any vehicle-trailer combination and promotes maximum safety on the road. The compact, portable design also allows for easy transfer from one vehicle to another.
Stock # | Retail |
---|---|
474-6 | $221.93 |
3214 ADJ. HITCH BAR - 14"
Weight Dist. Shank, 14,000 Lbs (GTW), 1,400 Lbs (TW) - 14” Length
CEQUENT TOWING PRODUCTS
All adjustable hitch bars (shank) can be used in raised or dropped position. Designed for use with all Trunnion and Round Bar Hitches. Long Hitch bars provide the extra length for bumper clearance. Black Powder Coat Finish. Box w/Label.
Stock # | Retail |
---|---|
832-10 | $402.60 |
3215 ADJ. HITCH BAR - TALL
6-7/8" Drop, 10-1/8" Rise, 11" Length
CEQUENT TOWING PRODUCTS
Designed for use with all Trunnion and Round Bar Weight Distribution Kits. Can be used in the rise or drop position. 2" x 2" Solid Shanks. Black powder coat finish. 1400/14,000 lbs (TW/GTW).
Stock # | Retail |
---|---|
832-11 | $452.10 |
BOLT-ON W/D CHAIN HANGERS
Wt. Dist. Accessory Chain Hanger, Bolt On
CEQUENT TOWING PRODUCTS
Use these brackets when the traditional snap up bracket won't fit because the propane tank rack,"
Stock # | Retail |
---|---|
832-16 | $258.23 |
CLAMP-ON W/D CHAIN HANGERS
Wt. Dist. Accessory Chain Hanger, Clamp On
CEQUENT TOWING PRODUCTS
Use these brackets when the traditional snap up bracket tank, battery box etc are in the way. These slimmer brackets take up less space on the trailer tongue and install without drilling.
Stock # | Retail |
---|---|
832-17 | $262.36 |
Handy Hitch Handle
1-Hole
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock # | Retail |
---|---|
832-18 | $30.51 |
HANDY HITCH HANDLE - 2 HOLE
DEREK SCOTT
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock # | Retail |
---|---|
832-19 | $53.82 |
HANDY HITCH HANDLE-1HOLE PLATE
DEREK SCOTT
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock # | Retail |
---|---|
832-20 | $18.41 |
HANDY HITCH HANDLE-2HOLE PLATE
DEREK SCOTT
Handy Hitch Handle is lightweight, durable and bolts together in minutes. Transporting that dirty, greasy, heavy hitch bar can now be done with ease.
Stock # | Retail |
---|---|
832-21 | $21.15 |
HITCH GRIP
LMD PRODUCTS INC.
This revolutionary tool make lifting, carrying and attaching your trailer hitch assembly fast, safe and easy! You will keep your clothes clean and never strain your back again.
Stock # | Retail |
---|---|
832-23 | $57.51 |
54970 ADJ. HITCH BAR - STND.
1-1/4" Drop, 6" Rise 13" Length
CEQUENT TOWING PRODUCTS
Standard Hitch Bar is # 832-8 and can be used with all 2" x 2" weight distribution kits. Other sizes available to accommodate different drop/rise requirement. Hitch bars may be used in either the up or down position to match the ball mount to any coupler height.
Stock # | Retail |
---|---|
832-8 | $295.35 |
3212 ADJ. HITCH BAR - 12"
1" Drop, 5-3/4" Rise, 14" Length
CEQUENT TOWING PRODUCTS
Standard Hitch Bar is # 832-8 and can be used with all 2" x 2" weight distribution kits. Other sizes available to accommodate different drop/rise requirement. Hitch bars may be used in either the up or down position to match the ball mount to any coupler height.
Stock # | Retail |
---|---|
832-9 | $237.60 |
SOCKET PINS W/ THUMB CLIPS
Large
PROGRESS MFG
Pair of socket pins with thumb clips.
Stock # | Retail |
---|---|
833-10 | $18.31 |
SWAY BRACKET JACKETS (2/PK)
PROGRESS MFG
Sway bracket jackets are plastic pieces that fit around the L-brackets minimizing wear and giving a quieter ride. Contains two sway bracket jackets.
Stock # | Retail |
---|---|
833-11 | $52.02 |
10" FRAME INSIDE LINK PLATE
Inside Link Plate For 10" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the inside of the trailer frame.
Stock # | Retail |
---|---|
833-12 | $35.82 |
10" FRAME OUTSIDE LINK PLATE
Outside Link Plate For 10" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the outside of the trailer frame and has the L-bracket bolted to it. Only compatible with 6 hole L-brackets, not 8 hole L-brackets.
Stock # | Retail |
---|---|
833-13 | $71.82 |
HIGH PERFORMANCE LUBRICANT 4OZ
PROGRESS MFG
Easy application tube and less odor. Works great for lubricating hitch balls, hitch head, and L-brackets.
Stock # | Retail |
---|---|
833-18 | $26.91 |
SOCKET PIN & CLIP
PROGRESS MFG
Replacement pin and clip to attach arm to the hitch head.
Stock # | Retail |
---|---|
833-19 | $11.45 |
SNAP UP LEVER
PROGRESS MFG
Replacement Snap-Up Lever for use with Equalizer hitches.
Stock # | Retail |
---|---|
833-26 | $59.22 |
SWAY BRACKET - COMPLETE
Sway Bracket - Left Or Right Hand
PROGRESS MFG
This sway bracket will fit either Left or Right Hand and will match hitches with 6 holes L-brackets. Compatible with 3", 4", 5", and 6" trailer frames.
Stock # | Retail |
---|---|
833-27 | $182.01 |
4K HITCH SHANK 6" DROP
6"drop, 10" Rise x 12" Length (4K Only)
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock # | Retail |
---|---|
833-29 | $270.60 |
2 1/2" SHANK- 3" DROP, 7" RISE
2-1/2" Shank - 12" Long X 3" Max Drop Or 7" Max Rise
PROGRESS MFG
These 2-1/2" shanks are made for customers that have HD pickups with 2-1/2" receivers. Equal-i-zer hitch shanks are made in the USA and come with a limited lifetime warranty.
Stock # | Retail |
---|---|
833-30 | $386.10 |
2 1/2" SHANK- 4" DROP, 8" RISE
2-1/2" Shank - 12" Long X 4" Max Drop Or 8" Max Rise
PROGRESS MFG
These 2-1/2" shanks are made for customers that have HD pickups with 2-1/2" receivers. Equal-i-zer hitch shanks are made in the USA and come with a limited lifetime warranty.
Stock # | Retail |
---|---|
833-31 | $386.10 |
4" INSIDE LINK PLATE NORCO FRM
Inside Link Plate 4" Frames Including BAL Norco 4-3/8" Frames
PROGRESS MFG
The portion of the sway bracket that is installed on the inside of the trailer frame.
Stock # | Retail |
---|---|
833-32 | $32.22 |
8" FRAME INSIDE LINK PLATE
Inside Link Plate For 8" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the inside of the trailer frame.
Stock # | Retail |
---|---|
833-33 | $32.22 |
4" OUTSIDE LINK PLATE NORCO FR
Outside Link Plate For 4" Frames Including BAL Norco 4-3/8: Frames
PROGRESS MFG
The portion of the sway bracket that is installed on the outside of the trailer frame and has the L-bracket bolted to it. Only compatible with 6 hole L-brackets, not 8 hole L-brackets.
Stock # | Retail |
---|---|
833-34 | $71.82 |
8" FRAME OUTSIDE LINK PLATE
Outside Link Plate For 4" Frame
PROGRESS MFG
The portion of the sway bracket that is installed on the outside of the trailer frame and has the L-bracket bolted to it. Only compatible with 6 hole L-brackets, not 8 hole L-brackets.
Stock # | Retail |
---|---|
833-35 | $71.82 |
SNAP L-PIN & CLIP
Snap L-Pin 1 Pack
PROGRESS MFG
The new Snap L-pin is the latest and greatest innovation for your Equal-i-zer® hitch. This new design eliminates the need for a separate clip to keep the L-pin in place. Works like a linch pin where the place. The new design also holds the L-pin slightly above the top of the Equal-i-zer spring arm, which helps reduce hitch noise, especially in slow, tight turns. NOTE: The new hitch noise, especially in slow, tight turns. NOTE: The new Snap L-pin is not compatible with the Equal-i-zer Sway Bracket Jackets.
Stock # | Retail |
---|---|
833-37 | $17.82 |
SNAP L-PIN & CLIP-2/PK
Snap L-Pin 2 Pack
PROGRESS MFG
The new Snap L-pin is the latest and greatest innovation for your Equal-i-zer® hitch. This new design eliminates the need for a separate clip to keep the L-pin in place. Works like a linch pin where the place. The new design also holds the L-pin slightly above the top of the Equal-i-zer spring arm, which helps reduce hitch noise, especially in slow, tight turns. NOTE: The new hitch noise, especially in slow, tight turns. NOTE: The new Snap L-pin is not compatible with the Equal-i-zer Sway Bracket Jackets.
Stock # | Retail |
---|---|
833-38 | $39.42 |
HITCH SHANK 6" DROP
6" Drop, 10" Rise, 12" Length, Draw Bar
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock # | Retail |
---|---|
833-4 | $336.60 |
E2 HITCH SHANK 4" DROP
E2 Shank 4-7/8" Drop X 9-5/8" Rise X 14" Adj.
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock # | Retail |
---|---|
833-45 | $287.10 |
E2 HITCH SHANK 6" DROP
E2 Shank 6-1/8" Drop 10-7/8" Rise X 13" Length Adj
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock # | Retail |
---|---|
833-46 | $328.35 |
E2 HITCH SHANK 8" DROP
E2 Shank 8" Dropx No Rise X 14" Adj.
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock # | Retail |
---|---|
833-47 | $377.85 |
E2 HITCH SHANK 2" DROP
E2 Shank 2.5" Drop, 5.5" Rise, 12" Length
PROGRESS MFG
Adjustable shanks for Fastway e2 hitches.
Stock # | Retail |
---|---|
833-48 | $287.10 |
HITCH SHANK 9" DROP
9" Drop, 13" Rise, 12" Length, Draw Bar
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock # | Retail |
---|---|
833-5 | $361.35 |
HITCH SHANK 4" DROP
4" Drop, 8" Rise, 12" Length, Draw Bar
PROGRESS MFG
Solid, durable weight distributing hitch bar.
Stock # | Retail |
---|---|
833-7 | $270.60 |
SNAP L PIN AND CLIP - SINGLE
Single Spare Pin Pack
PROGRESS MFG
Lost Spare Pin Survival Pack
Stock # | Retail |
---|---|
833-8 | $34.02 |
DOUBLE SPARE PIN PACK
PROGRESS MFG
Lost Spare Pin Survival Pack
Stock # | Retail |
---|---|
833-9 | $62.82 |
FRAME BRACKET ASSEMBLY-2/PK
Snap-up Bracket-2/pk
CEQUENT TOWING PRODUCTS
Wt. Dist. Part, Lift Unit Kit, (2) Brackets and Handle
Stock # | Retail |
---|---|
834-1 | $243.38 |
54938 ADJ.BALL MOUNT 14"BAR
With #3212 Hitch Bar For Standard Trunnion
CEQUENT TOWING PRODUCTS
Complete adjustable ball mount. Hitch ball not included
Stock # | Retail |
---|---|
834-11 | $508.50 |
58162 CHAIN LIFTER HANDLE
Snap-Up Handle
CEQUENT TOWING PRODUCTS
Replacement handle for Snap-up Brackets.
Stock # | Retail |
---|---|
834-16 | $44.82 |
58033 SQ. HEAD SET SCREW 2/KT
Square Head Set Screw
CEQUENT TOWING PRODUCTS
Replacement Square Head Bolts for use on Snap-up Brackets. 1/2" - 13 x 3-1/2". 2 per package.
Stock # | Retail |
---|---|
834-17 | $26.82 |
SAFETY PIN
Bulk
Replacement Pin for use on Snap-Up Brackets. Designed to lock Snap-Up Bracket in place during use.
Stock # | Retail |
---|---|
834-20 | $1.38 |
58025 TRUNNION LATCH KIT
CEQUENT TOWING PRODUCTS
Stock # | Retail |
---|---|
834-21 | $26.82 |
58167 BALL MOUNT W/HARDWARE
High-Performance Trunnion Head W/Hardware
CEQUENT TOWING PRODUCTS
Adjustable ball mounts for use with Reese Weight Distributing Hitches. Comes complete with hardware.
Stock # | Retail |
---|---|
834-23 | $452.10 |
55630 CHAIN PACKAGE
CEQUENT TOWING PRODUCTS
Replacement chain for use with Chain Style Weight Distributing Hitches. Includes 1x 9 Link Chain, 1 x U Bolt, 2 Washers and 2 Nuts.
Stock # | Retail |
---|---|
834-27 | $35.82 |
63971 ADJ. HITCH BAR - TALL
Wt.dist. Shank 15,000lbs (GTW) 1,500 Lbs (TW) 14" Length, Extra Drop (use In Drop Position Only)
CEQUENT TOWING PRODUCTS
Standard Hitch Bar is # 832-8 and can be used with all 2" x 2" weight distribution kits. Other sizes available to accommodate different drop/rise requirement. Hitch bars may be used in either the up or down position to match the ball mount to any coupler height.
Stock # | Retail |
---|---|
834-29 | $410.85 |
3344 ADJ. HITCH BAR - TALL
8-5/8" Drop, 0" Rise, 11" Length
CEQUENT TOWING PRODUCTS
This Extra drop hitch bar is designed for use with all Trunnion and Round Bar Weight Distribution kits. Use in the DROP position only. 2" x 2" solid shank. Black powder coated finish. 1400/1 4,000 lbs. (TW/GTW).
Stock # | Retail |
---|---|
834-30 | $493.35 |
63911 ADJ. HITCH BAR-11"
Adjustable Hitch Bar, 11" length
CEQUENT TOWING PRODUCTS
Rated at 12,000 lb. gross trailer, and 1,200 lb. tongue wt. Industry standard 6 mounting holes at 1.25" apart.
Stock # | Retail |
---|---|
834-31 | $311.85 |
54985 ADJ. HITCH BAR - TALL
6" Drop, 9-1/2" Rise, 14" Length
CEQUENT TOWING PRODUCTS
Tall adjustable Hitch Bar for use with the Mini Weight Distributing Hitch. # 831-0 and 831-1. Can
Stock # | Retail |
---|---|
834-39 | $278.85 |
54998 ADJ. HITCH BAR
Adjustable Hitch Bar 12-1/4" Length
CEQUENT TOWING PRODUCTS
Cast shank, machined for a tighter fit. Rated up to 16,000 lbs. GTW and 1,600 lbs. TW. Seven vertical mounting holes with groove for mounting accessories. Works with any weightdistributing
Stock # | Retail |
---|---|
834-42 | $361.35 |
58112 BALL MOUNT ASSEMBLY
Weight Distributing Round Bar Hitch W/Hardware
CEQUENT TOWING PRODUCTS
Adjustable ball mounts for use with Reese Weight Distributing Hitches. Comes complete with hardware.
Stock # | Retail |
---|---|
834-43 | $523.50 |
HIGH PERF.COMPLETE ADJ. BALL M
Ball Mounts With Hitch, W/54970 For High Preformance Trunnion Style
CEQUENT TOWING PRODUCTS
Complete adjustable ball mount. Hitch ball not included
Stock # | Retail |
---|---|
834-47 | $598.50 |
3280 POLE TONGUE ADAPTER
CEQUENT TOWING PRODUCTS
A Pole Tongue Adapter is used as a mounting platform for the hook-up brackets of a weight distributing hitch system when a trailer has a pole or straight tongue rather than an A-frame tongue. Fits all lift units regardless of manufacturer. Fits Tongue Widths From 1-5/8" to 5". Fits Tongue Heights From 3" to 6".
Stock # | Retail |
---|---|
835-13 | $402.60 |
TEFLON BALL LUBE
CEQUENT TOWING PRODUCTS
Non greasy, water resistant, non-toxic, reduces coupler and ball wear.
Stock # | Retail |
---|---|
835-20 | $28.35 |
Hitch Shin Guard
Yellow
PROGRESS MFG
The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.
Stock # | Retail |
---|---|
853-10 | $18.41 |
Hitch Shin Guard
Black
PROGRESS MFG
The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.
Stock # | Retail |
---|---|
853-8 | $18.41 |
Hitch Shin Guard
Orange
PROGRESS MFG
The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.
Stock # | Retail |
---|---|
853-9 | $18.41 |